IoT

How to Interface GPIO Using MicroPython? The General-Purpose Input/Output GPIO pins are present on an integrated circuit or board that can be used to perform...

E32-433T20DT is a wireless transceiver module that uses LoRa technology for transmitting and receiving. It is based on SX1278 chipset from SEMTECH, The transmitter...

Getting Started With UART Universal asynchronous receiver/transmitter often shortened to UART is a device used for serial communication. It takes 1 byte of data and...

What is ADC and How does it work? The ADC is basically a system that converts an analog signal, such as sound, temperature, wind-speed, orientation,...

Getting Started With SPI Serial Peripheral Interface (SPI) is a synchronous serial communication bus that we commonly use to transfer data between microcontrollers and other...

IntroductionA brief look into Arduino's new Nano Board On 17th May, Arduino announced their new board to compete with Raspberry Pico board. Arduino had long...

Getting Started With I2C The Inter-Integrated-Surface (I2C) Protocol is a synchronous serial communication bus that allows the transfer of data between a chip(master central processor)...

This article will provide you with all the details of the newly released Raspberry Pi 400 and guide you if you should buy a...

Introduction The Raspberry Pi 4 is the best single board computer on the market. Not only does it have WiFi for faster speeds, but also...

An ultrasonic sensor is a device that uses sound waves and the reflection of these same waves (echoes) to measure distance. The frequency or...

The Raspberry Pi Pico is an amazing piece of technology and a wonderful gadget to dive into in the realm of IoT. While it...

Introduction In this tutorial, we'll connect a Raspberry Pi Pico to a 7-segment display. The cheapest display unit is a seven-segment display. You can show...

IntroductionWhat is a Motion Sensor and why we need it? A motion sensor, or motion detector, is an electronic device that uses sensor(s) to detect...

What is HomeBridge? HomeBridge is a JavaScript(NodeJS) based application, which allows you to integrate various smart home devices such as smart lights, thermostats, motion sensors...

Questions addressed in this BlogWhat do you require to setup Raspberry Pi Pico with DC motors?How do you setup the hardware for connecting Raspberry...

The Raspberry Pi Pico is a cost effective component to play and tinker with if you intend to dive into the world of IoT...

Building your own DIY weather monitoring station is not a herculean task. You can design one for your home or office using minimum hardware...

Frequently asked questions on Raspberry Pi Pico What is a Raspberry Pi Pico and what does it do? The Raspberry Pi Pico is a microcontroller board...

The Raspberry Pi Pico is a fantastic controller board for your electronic creations. When you unpack Raspberry Pi Pico, you'll see that it's totally...

Today, in this article, we will talk about Raspberry Pi Pico vs ESP-32 The Raspberry Pi Pico is an all-new $4 microcontroller board that...

Raspberry Pi Pico is the latest member of the Raspberry-Pi line-up, and it has many unique features that set them apart from their peers....

Raspberry Pi Pico vs Arduino are the two most dependable hardware for an IoT project. Both these hardwares can even be integrated with other...

Introduction In the day and age of internet and wireless communication, you must have come across the term wireless signal numerous times. Technical experts across...

What is Raspberry Pi Compute Module 4? The Raspberry Pi Compute Module 4 is a stripped-down version of the Raspberry Pi 4 Model B. It...

Your internet-connected devices — smart TVs, security cameras, smart locks, gaming consoles, smart thermostats — can add a level of convenience to your life,...

Making your home smart, Thinking where to start from This articles is a starting guide to take 1st step towards Smart Home